Option

Description

Device Name

Indicates the name under which the instrument is identified in the installation environment (default: HPLC_System; also, refer to Naming Devices...). To control the instrument via the existing Control Panels, accept the default name. If you do not accept the default name, you may have to edit the PGM Files and re-link the corresponding control of the control panel. (Also, refer to How to: Controlling Devices from the Control Panel  Linking a Control to a Device.)

Select the type of system controller you are using

Click the system controller that is appropriate for your Shimadzu HPLC system.

COM Port

Select the COM Port used by the HPLC System to communicate with the system controller.

IP Address

(CBM system controllers on LC-20A Prominence and LC-30A Nexera HPLC systems only). Enter the network IP address of the system controller in the box.

Demo Mode

Select this check box to enable Demo Mode. (The Demo Mode check box is only available in the installation wizard.) Instead of displaying real data, data are simulated if Demo Mode is enabled.