Analyzing 3D Amperometry Data

The ICS-3000 Electrochemical Detector (ED) and ICS-5000 Electrochemical Detector (ED) can collect 3D amperometry data when it is running in integrated amperometry mode. To turn on collection of 3D amperometry data, enable the 3D_Amp channel check box in the Program Wizard or Program Editor. This adds a 3D_Amp.AcqOn command to the control program. After collecting the 3D data, you can view and analyze it in the 3D amperometry window of any Chromeleon PC that has Release 6.7 or higher installed (for an ICS-3000 ED) or Release 6.8 SR9a or higher installed (for an ICS-5000 ED).

 Note:  

The 3D Data Acquisition license is required to acquire 3D amperometry data. See Chromeleon (Overview) Chromeleon Licenses.

For more information, refer to:

 Displaying a Sample's 3D Amperometry Data

Selecting the Integrated or Raw 3D Amperometry View

Changing the 3D Amperometry Plot Scale

 Viewing Chromatograms in the 3D Amperometry Window

 Viewing I-t Plots in the 3D Amperometry Window

Baseline Correction of I-t Plots

 Editing Integration Intervals

 Extracting a Chromatogram from 3D Amperometry Data

 Exporting a Chromatogram, an I-t Plot, or 3D Amperometry Data

For an overview of 3D amperometry window features, refer to  The 3D Amperometry Window.