Creating and Using Report Tables
Displaying MS Reports

Similar to the History report, the different MS reports are not part of the default Report Definition File (RDF). Select Insert > Chromeleon Report Table to add them as separate worksheets to a report definition file (see How to …: Creating and Using Report Tables  Adding and/or Renaming a Worksheet):

• Select the MS Instrument Info Report to display information about the Mass Spectrometer. If there is no MS data, the following message appears in the report: "No MS Instrument Info found".

• The MS Instrument Method Report indicates the MS method. If there is no MS data, the following message appears in the report: "No MS Instrument Method found."

   Note:

  The MS Method (under PGM tables) indicates the current method. It is possible that both MS methods are identical.

• The MS Raw Report shows the raw data (mass, intensity, and relative intensity) of the Mass Spectrum of the current sample. If no MS data is available, the report just says: "No MS Raw Data found."

• The MS Status Log Report shows the mass spectrometer settings. If there is no MS data, the report just says: "No MS Status Log found."

• Select the MS Tune Data Report to display the tune data of the Xcalibur raw data file. If there is no MS data, the report just says: "No Tune Data found".

 Notes:

If the MS Control option is disabled on your PC, the MS reports will not be displayed in the Insert Report Table dialog box.

All MS reports comprise only the default columns. It is not possible to add more columns.