Calibration Examples
Calibration Modes for External Calibration

The Calibration Mode determines the standard samples that are used for calibrating specific unknown samples. The following calibration modes are available:

 

Calibration Mode

Description

Total

All standard samples of the current sequence

Group

Grouping calibration

Additional

Additional standard samples for the samples that appear later in the sequence.

Bracketed

Unknown samples are "bracketed" by standard samples.

Fixed

Specific standard samples (also from other sequences)

 

For a schematic representation of the Group, Additional, and Bracketed calibration modes, refer to the example below:

 

For more information about the different calibration modes including calibration curve calculation, refer to the topics below:

 Calibration Mode: Total

 Calibration Mode: Additional

 Calibration Mode: Group

 Calibration Mode: Bracketed

 Calibration Mode: Fixed

 

 Note:

Please note that the procedure is described for the Total mode. All other examples describe the differences between the calibration modes only.