Option

Description

Device Name:

Indicates the name under which the instrument is identified in the installation environment (default: UV; also, refer to Naming Devices...). To control the instrument via the existing Control Panels, accept the default name. If you do not accept the default name, you may have to edit the PGM Files and re-link the corresponding control of the control panel. (Also, refer to How to: Controlling Devices from the Control Panel  Linking a Control to a Device in the User Help section.)

Device address:

Select the GPIB board from the corresponding drop-down list (default: GPIB0).

Select the device number from the Device Id drop-down list (default: DEV 10). The Device Id must correspond to the setting on the instrument (DIP switches).

Demo Mode:

Select this check box to enable Demo mode. You can control the HP 1050 UV detector in Demo mode, but data acquisition is disabled.