Option

Description

Device Name:

Indicates the name under which the instrument is identified in the installation environment (default: Sampler; also, refer to Naming Devices...). To control the instrument via the existing Control Panels, accept the default name. If you do not accept the default name, you may have to edit the PGM Files and re-link the corresponding control of the control panel. (Also, refer to How to: Controlling Devices from the Control Panel  Linking a Control to a Device in the User Help section.)

Serial Communication:

Select the serial interface to be used for the instrument connection (Port). This is not possible in Demo Mode.

In addition, the current interface parameters (baud rate; data bits, parity, stop bits, and handshake) are displayed.

Inject Port:

Indicates the response of the injection port.