Audit Trails.) The Preconditions are displayed if you selected Preconditions only or Preconditions and Run on the View or context menu."Preconditions" Category
Depending on the connected instrumentation, thousands of Preconditions variables exist. They allow you to display the device settings before a sample run in the Audit Trails. (For more information about Audit Trails, refer to Data Management Audit Trails.) The Preconditions are displayed if you selected Preconditions only or Preconditions and Run on the View or context menu.
The list below contains some of the variables that are typically available during data acquisition with a P680 pump or a UVD 340 detector.
P680
|
Variable |
Formula |
Description |
|
Average (Pump_Pressure) |
precond.Pump_Pressure. |
Status of averaging (also, see Average) |
|
Equate (%A) |
precond.Pump.%A.Equate |
Name of eluent component A (components B, C and D accordingly) |
|
Flow |
precond.Pump.Flow |
Flow rate |
|
Lower Limit (Pressure) |
precond.Pump.Pressure. |
Lower pressure limit (see Pressure.Lower/UpperLimit) |
|
Step (Pump_Pressure) |
precond.Pump_Pressure. |
Step for each channel (also, see Step) |
|
Upper Limit (Pressure) |
precond.Pump.Pressure. |
Upper pressure limit (see Pressure.Lower/UpperLimit) |
|
Value (Pump.%A) |
precond.Pump.%A.Value |
Percentage of the component in the solvent (partial flow): %B, %C, %D (in the same way for components B, C, and D) |
|
Value (Pump.%A_Level) |
precond.Pump.%A_Level |
Value for the %A, %B, %C, %D_Levels (in the same way for the components B, C, and D) |
|
Value (PumpWasteLevel) |
precond.Pump.WasteLevel |
Value for the WasteLevel (in the same way for the components B, C, and D) |
UVD340
|
Variable |
Formula |
Description |
|
Average |
precond.Average |
Status of averaging: enabled or disabled (see Average) |
|
Bandwidth |
precond.BandWidth |
Bandwidth (for each UV channel) |
|
Bunch Width |
precond.3DFIELD.Bunch |
Bunch Width of the diode bundle (3D-field only) |
|
LampIntensity |
precond.LampIntensity |
LampIntensity [counts/s] |
|
MaxAutoStep |
AUDIT.MaxAutoStep |
Maximum value for Step = Auto (see MaxAutoStep) |
|
Max. Wavelength (3DFIELD) |
precond.3DFIELD.Max |
Maximum wavelength of the 3D Field |
|
Min. Wavelength (3DFIELD) |
precond.3DFIELD.Min |
Min. wavelength of the 3D field |
|
Ref Wavelength |
precond.RefWavelength |
RefWavelength (Reference Wavelength) (for each UV channel) |
|
Ref Bandwidth |
precond.RefBandwidth |
RefBandwidth (Reference Bandwidth) (for each UV channel) |
|
Step |
precond.Step |
|
|
Wavelength |
precond.Wavelength |
Wavelength (for each UV channel) |
For an overview of the different report variable categories, including links to the lists for the respective categories, refer to Report Categories.