Installing and Controlling Third-Party Devices
Pharmacia LKB2150 HPLC Pump: Installation
Hardware Installation
Software Installation
Install the Device Driver in the Chromeleon Server Configuration. (For more information about the program, refer to Software Installation and Communication The Server Configuration Program.)
Start the Chromeleon server.
Start the Server Configuration program.
Add the pump to the timebase. Select Add Device on the Edit or context menu, and then select LKB from the Manufacturers list box and 2150 Pump from the Devices list box.
The following settings are required:
On the General tab page, select the COM port to which the pump(s) is connected. In addition, disable the Demo Mode.
The Error Levels tab page classifies the severity of any errors that occur. It is generally not necessary to change the default settings.
To control the pump, connect the LKB2150Gradient.pan Control Panel or any specially developed control panel in the Chromeleon client to the corresponding timebase.
Application
Nothing particular known.
Further Information
Tip:
For more installation details, refer to the manual for the instrument.
For an overview of the pump, refer to Pharmacia LKB2150 HPLC-Pump: Overview.
For an overview of the different Pharmacia instruments that can be controlled by Chromeleon, refer to Pharmacia.