Use

Enable the check box of the installed column(s).

PPC

Select this check box to enable programmable pressure control for the associated injector. (This options available only if you have selected the Programmable pneumatic (PPC) check box on the Components page.

Device Name

Accept the name under which the instrument is identified in the installation environment (Also, refer to Naming Devices...). To control the instrument via the existing Control Panels, accept the default name. If you do not accept the default name, you may have to edit the PGM Files and re-link the corresponding control of the control panel. (Also, refer to How to: Controlling Devices from the Control Panel  Linking a Control to a Device in the User Help section.)

Gas monitor:
quantity [unit]

(This option is supported only if the Programmable pneumatic (PPC) option has been disabled on the Components page. Select a pressure or flow unit for manual pneumatic checking.

• Press [kPa]

• Press [psig]

• Flow [ml/min]

 Tip:  

The selected pressure unit must match the unit set on the device. Otherwise, the GC cannot be connected.