Option

Description

Detector Type

Select the installed detector type.

Device Name

Indicates the name under which the instrument is identified in the installation environment (also, see Naming Devices). The default name is CAD. To control the instrument from the existing Control Panels, accept the default name.

If the default device name is already used, a red warning symbol and an error message appear in the Audit Trail. In this case, assign the detector a new device name. If you assign a different name, you must edit the PGM Files and re-link the corresponding controls on the control panel. (Also, refer to Controlling Devices from the Control Panel  Linking a Control to a Device.)

Monitor Waste Level

(Corona ultra RS only) Select this check box to enable monitoring of the waste bottle liquid level.