Tab Dialog Box:
Oven

Enable or disable control of an oven:

 

Option

Description

 

 

Installed

If an oven is installed, select this check box to enable control of the oven by Chromeleon. Clear the check box to disable oven control.

 

 

Device Name:

Indicates the name under which the instrument is identified in the installation environment. Oven is the default device name (also, see Naming Devices...). To control the instrument via the existing Control Panels, accept the default name. If you do not accept the default name, you have to edit the PGM File(s) and re-link the corresponding controls of the control panel. (Also, refer to How to: Controlling Devices from the Control Panel  Linking a Control to a Device in the User Help section.)

 

The Oven tab page is part of the pump's configuration properties. To open the tab page:

  1. In the Server Configuration program, select the pump to which the oven is connected.

  2. Select Properties from the Edit menu and then select the Oven tab.

 Note:

If you are configuring a system that includes a detector, you must also specify the oven in the detector's configuration properties. For more information, see the Heat Source tab page.