Recorder_Range (Analog Output)
|
Type: |
Detectors |
|
Related Commands: |
|
|
Description: |
The Recorder Range command sets the range of a full-scale recorder response in the signal units appropriate for the detector. For example, for conductivity detectors, the Recorder Range is in microSiemens (µS). This command can be used to adjust the analog output to accommodate larger or smaller peak heights. The range to use depends on the detector readings expected for the application. For example, selecting a range of 20 microSiemens (µS) will allow you to view conductivity readings of 20 µS or less. |