Recorder_Calibration (Analog Output)
|
Type: |
Detectors |
|
Related Commands: |
|
|
Description: |
The Recorder_Calibration command calibrates a recording device connected to the analog output: |
|
Settings: |
|
|
AU |
(AD20/AD25 only) Sets the analog output to AU, scaled from 0 to 1 V, based on the AU full-scale response selected by the Recorder_Range command. |
|
Normal |
(Not used for AD20/AD25) The analog output produces a signal corresponding to the current detector output |
|
Zero |
Sets the analog output to 0 volts. |
|
Full_Scale |
Sets the analog output to the selected full-scale setting. |