Instrument Type:

Pump

Related Commands:

%A,%B,%C,%D_Level

WasteWarningLimit

Description:

This command allows you to enter a warning limit for monitoring the liquid level in the associated solvent reservoir. The input is entered as a percentage and refers to the lower liquid limit (%X_Level.LowerLimit).

Function:

If the liquid level in the solvent reservoir is below the lower limit plus the warning limit (%X_Level.LowerLimit + %X_WarningLimit), the following warning appears:

[Warning] xx:xx:xx {Pump} The %A level (x l) will reach the lower limit in about x.x hours! Please refill %A.

 Tip:

If the liquid level reaches the %X_Level.LowerLimit, the batch is aborted. In the emergency program, reduce the flow to 0 ml/min. This ensures that the pump and the flow cell never run dry.