Commands and Tips for Thermo Scientific Devices
Thermo Scientific Surveyor Plus LC Pump: Emergency Program

If a fatal error occurs during a batch run, the batch will be aborted automatically. In this case, an Emergency Program can be started to prevent damage to the system.

The emergency program below specifies the commands that are needed for a Surveyor Plus LC system. The program can be used to stop the pump flow and turn off the detector lamps:

 ;Emergency Program for Surveyor Plus LC System
 ;Stops the pump flow and turns detector lamps off
 
 Flow                  = 0.000 [ml/min]   
 UV_Lamp          = Off 
 Visible_Lamp    = Off
 End

Also, refer to  Specifying an Emergency Program.