Property

Min.

Max.

Default

Description

AirFlow
(Detectors without EPC option)

0.0 ml/min

800.0 ml/min

² (Demo
mode:
400.0 ml/min)

Air gas flow. In this form, the property is available only for detectors without EPC option, see the Detector configuration tab page. The property is read-only.)

AirFlow
(Detectors with EPC option)

-

-

-

Properties related to the air gas flow. In this form, the property is available only for detectors with EPC option, see the Detector configuration tab page.

 AirFlow.Value

0.0 ml/min

800.0 ml/min

-

Current air gas flow (read-only).

 AirFlow.
Nominal

0.0 ml/min

800.0 ml/min

0.0 ml/min

Specifies the target air gas flow.

AirFlowCtrl
(Detectors with EPC option)

Off

On

² (Demo
mode: Off)

Turns the pneumatics on and off. In this form, the property is available only for detectors with EPC option, see the Detector configuration tab page.

Electrometer

Off

On

² (Demo
mode: Off)

Turns the detector electronics on and off.

Flame

Off

On

² (Demo
mode: Off)

Turns the flame on and off.

H2Flow
(Detectors without EPC option)

0.0 ml/min

100.0 ml/min

² (Demo
mode:
30 ml/min)

H2 gas flow. In this form, the property is available only for detectors without EPC option, see the Detector configuration tab page. The property is read-only.

H2Flow
(Detectors with EPC option)

-

-

-

Properties related to the H2 gas flow. In this form, the property is available only for detectors with EPC option, see the Detector configuration tab page.

 H2Flow.
Nominal

0,0 ml/min

100,0 ml/min in in increments of 1

² (Demo
mode: 30 ml/min)

Specifies the target H2 gas flow.

 H2Flow.Value

0.0 ml/min

100.0 ml/min

Current H2 gas flow.

H2FlowCtrl

Off

On

² (Demo
mode: Off)

Turns the pneumatics on and off. In this form, the property is available only for detectors with EPC option, see the Detector configuration tab page.)

LitOffset

0.00 pA

99.9 pA
in increments
of 1

² (Demo
mode: 0.0 pA)

If the detector output is below this level, the GC assumes that the flame is no longer burning and tries to reignite the flame.

MakeupGasType

Nitrogen, Hydrogen, Helium, Argon Methane, Unknown

² (Demo
mode: Nitrogen)

Makeup gas type. The property is available only for FID detectors with EPC option, see the Detector configuration tab page.

OxidizerGasType

Oxygen) Air,
Unknown

The property is available only for FPD detectors with EPC option, see the Detector configuration tab page.