DX-120 Ion Chromatograph

Dionex Ion Chromatography Systems
Dionex DX-120 Ion Chromatograph

The following commands are available for control of DX-120 operating functions (please note that the display Filter level determines which commands are displayed):

Command	Description
Column	If the DX-120 is in Column Mode, the Column command sets the flow path to column A or column B. Refer to Selecting the DX-120 Mode.
Controlled AC	Turns the AC power outlet on the DX-120 rear panel on and off. This provides on off control of an external accessory connected to the outlet. Refer to the DX-120 operator’s manual for cabling instructions.
Data_Collection_Rate	Sets the rate at which Chromeleon collects digital data points from the detector.
Eluent	If the DX-120 is in Eluent Mode, the Eluent command selects the eluent reservoir (A or B). Refer to Selecting the DX-120 Mode.
Eluent Pressure	Turns the pressure to the eluent reservoir(s) on and off.
Pressure Unit	Select the units of pressure to use (psi or MPa).
Pump	Turns the pump on and off.
SRS	Turns the current supplied to the Self-Regenerating Suppressor (SRS) on and off.