Ready (Signal)

After each autosampler operation, for example, Draw, a ready signal command (Sampler.Ready) is sent to Chromeleon as confirmation. Other commands, such as Dispense, can only be executed after receipt of this signal.

The time interval between the autosampler operation and the response Sampler.Ready is the minimum value for the Duration command.

To execute two commands successively, Wait is entered after the first command in the Program. The next command will then be executed immediately after the arrival of the Sampler.Ready signal.

Tip:

The command used for drawing liquid for the GINA autosamplers is "Suck". The corresponding ready signal is "Sucked".