Instrument Type:
Related Commands:
Description:
The Wait command interrupts program execution until the specified remote input signal arrives.
Function:
Wait stops the program execution. In the Hold mode, it also stops the time and data acquisition; the pump(s) are on Hold. In the Continue mode, the time, data acquisitions and pump flow continue.
For examples of how to use the Wait command, refer to Practical Tips for Device Control:
Autosampler Commands (ASI-100)
Special Commands, Relay Control, and Miscellaneous: Mixed Commands
Parameter:
Condition
The system waits until the condition specified here is realized (see Trigger)
Run
Switches from Hold to Continue.
Timeout
Sets the maximum period of time during which the system waits for the condition to become true. If this time is exceeded, the system aborts the running batch.
Tip:
It is mandatory to specify a timeout if working in Continue mode.