Device Type:

HPLC system

Device Driver:

Shimadzu: LC-10A/LC-20A/LC-30A LC System

Hardware Options
Supported:

Module

LC-10A HPLC System:

SCL-10Avp System Controller (required)

Up to 3 pump modules are supported.

Up to 3 LPG Solvent Valve modules are supported.

Up to 2 UV/VIS detectors are supported.

Stand-alone PDA detector:

SPD-M10Avp

LC-20A Prominence HPLC System:

Up to 3 pump modules are supported.

Up to 2 UV/VIS Detectors are supported.

For installation details on the stand-alone PDA detector, also refer to Shimadzu SPD-M10Avp/M20A PDA Detector: Installation

Up to 1 solvent Selection Valve per pump is supported.

Rack Changer

The following rack types are supported:
MTP 96, MTP 384, DWP 96, DWP 384, 54x1.5mL vials

Rinse Pump (optional pump for rinsing of the needle and flow lines, in combination with a SIL-20 and SIL-30 autosampler)

 Tip: 

Some modules of the LC-20A Prominence HPLC system can also be controlled by the SCL-10Avp system controller of the LC-10A HPLC system. In this case, the LC-20A modules are run in emulation mode. For details, refer to Operating the LC-20A System in Emulation Mode.

LC-30A Nexera HPLC System:

Up to 2 UV/VIS Detectors are supported.

 Tip:

For supported modules please refer to the List of Supported Instruments provided in the Additional Documents folder on the Chromeleon 6 installation medium.

Notes:

The driver was tested with Windows XP and the above firmware versions.

The driver supports digital data acquisition for up to 4 channels.

License:

Timebase Class 3

Connection:

Null modem cable, Dionex part no. 1310.2263 (For more information, refer to  Null Modem Cable.)

Hardware
Prerequisites:

LC-10A HPLC System:

A free RS-232 port is required on the Chromeleon server PC.

An SCL-10Avp System Controller is required for communication with Chromeleon. To control preparative LC-8A pumps that are connected to the SCL-10Avp, a PC-31L interface is required on the pump. (If two or more LC-8A pumps are installed in a timebase, one interface is required for each pump.) Communication between the interface and the controller is via the fiber-optical cable that is supplied with the device.

 Tip:

You cannot control the Shimadzu HPLC System via an RS-232 port on the UCI Universal Chromatography Interface.

LC-20A Prominence and LC-30A Nexera HPLC Systems:

• CBM-20A or CBM-20Alite system controller

• A free Ethernet port

• Ethernet LAN cable

Control Panel:

Shimadzu_LC-10A or Shimadzu_LC-10A_SIL-10ADvp