Left Valve/Right Valve

Indicates which column switching valve or injection valve is installed. Check and change the setting if necessary.

(TC only) The field below each drop-down box displays the name assigned to a TC injection valve.

controlled by AS

(TC only) Select the check box if the TC injection valve will be controlled by the AS Autosampler.

Post-column Cooler

(TCC-3000RS/SD only) Verify that the check box is selected. It must be selected if you want to set the temperature for post-column thermostatting and turn post-column thermostatting on and off (for example, from the Command dialog box or ePanel for the TCC-3000RS/SD).

Column A/B/C/D

Select the checkbox(es) of the column(s) for which you want to enable column identification. By default, columns A and B are preselected. The entry field behind the column displays the name used to identify the column in Chromeleon. Accept the default names.  If you do not accept the default names, you have to edit the PGM File(s) and re-link the corresponding controls of the control panel. For more information, refer to Naming Devices.... and How to: Controlling Devices from the Control Panel  Linking a Control to a Device.

on

Select the timebase to which the related column is assigned. With a TC, on fields are also available for the  injection valve assignment.

The default setting is the timebase in which the TCC or TC is installed. To change the setting, click the arrow next to the on field and select a different timebase from the list. The list shows all timbases for that server.