Location:

Detection tab page
Report Variable (Detection Parameters)

Type:

Fixed point number

Dimension:

Signal unit * Minute

Value Range:

0.000 ... 1,000,000.000

Default:

The default setting is Off; i.e., all peaks are integrated.

Related Parameters:

Minimum Area

Maximum Height Reject

Description:

Select the Maximum Area Reject parameter to limit the number of integrated peaks. This parameter is very similar to Minimum Area.

Function:

The parameter defines the maximum peak area up to which a peak is rejected. No peaks with a peak area below the defined value are integrated.

 Tip:

Contrary to the Minimum Area the Maximum Area Reject parameter does not affect the baseline course.