Kontron 465 AutosamplerCommands and Tips for Third-Party Devices
Kontron 465 Autosampler
In addition to the standard autosampler commands (see 
Dionex Autosamplers), Chromeleon supports the following Kontron 465 commands for pre-column derivatization (please note that the display Filter level determines which commands and properties are displayed). Also, refer to the information in the manual shipped with the instrument.
|
Command |
Description |
|
StartPosition |
Returns to the start position. |
|
GetReagent |
The reagent is withdrawn from a pre-defined position. |
|
Mix |
Mixes the reagents. |
|
AddReagentAndMix |
The reagent is added and mixed with the sample. |
|
AirSegment |
Draws an air segment. |
|
Parameter |
Description |
|
ReagentPosition |
Position of the reagent. |
|
ReagentVolume |
Reagent volume to be used. |
|
AirVolume |
Air volume to be drawn up after pulling the syringe needle out of the vial. |
|
MixingVolume |
Mixing volume. |
Tip:
The prerequisite for controlling this instrument is that the Extended Device Control feature must licensed on your system.
For more information, refer to Hardware Installation 
Kontron Autosamplers in the Administrator Help section.