Dilution Series

A dilution series consists of several samples with different concentrations ("concentration series"). The samples were generated from a common original sample. You may as well generate a dilution series by varying the injection volume.

A dilution series is especially useful for multiple-point calibration. Instead of injecting standard samples of different concentrations, different volumes are injected from a standard sample. (The principle is: Twice the injection volume contains exactly twice the amount of each component).

The corresponding amount is calculated as follows:

 Tip:

Note that the calculated amount values refer to the same standard sample. That is why, in the peak table, you only have to enter one Amount value (column 1) for each substance contained in the standard.