Installing Third Party Devices
Perkin Elmer Series 200 UV/VIS Detector: Installation

Device Type:

UV/VIS Detector

Device Driver:

Perkin Elmer: LC200 UV/VIS Detector

Restrictions:

The following options are not supported:

  • Spectral wavelength scan

  • Timed events

 

What is required?

License:

Timebase Class 2

Connection:

A free 9-pin RS-232 port must be available on the Chromeleon Server PC. To connect the detector to the PC, the following cable is required:

  • RS-232 mini-DIN signal cable (9-pin to 8-pin), shipped with the instrument

  • 9-pin to 9-pin adapter cable for COM port (Dionex part no. 8914.0154).

Tip:

The detector cannot be controlled via a UCI interface.

Also refer to Connecting Devices via RS-232.

Firmware Prerequisites:

Tested for firmware 1.01

Control Panel:

PerkinElmer_LC200_UV_VIS.pan

 

 

Software Installation

For details about how to add timebases and device drivers to the Server Configuration, refer to Adding, Configuring or Deleting Devices. When you add a driver to the timebase, the configuration dialog or wizard opens automatically. For information about the settings, click the Help button on a page or press F1.

Further Information

For more installation details, refer to the operating manual for the Series 200 UV/VIS Detector.

For an overview of the different Perkin Elmer instruments for which device drivers are available in Chromeleon, refer to Perkin Elmer.