Perkin Elmer Series 200 Diode Array Detector: Installation.Tab Dialog Box:
Signals
The Signals tab page lists all signals or Channels that can be recorded via the detector, and indicates the signal unit and amplifying factor.
|
Option |
Description |
|
No. |
Number of available channels. |
|
|
|
|
Use: |
Check a box to enable or disable the corresponding signal or the device channel. Only active signals can be used in Chromeleon, i.e., only these can be adjusted. Raw data can be recorded only for these signals/channels. |
|
|
|
|
Channel Name: |
Indicates the channel name. |
|
|
|
|
Unit: |
Indicates the signal unit of the recorded Raw Data. |
|
|
|
|
Factor: |
Indicates the amplification factor for the selected channel. |
|
|
|
|
Offset: |
Indicates the currently defined offset for this channel. |
For an overview of the Series 200 detector, refer to Installing and Controlling Third-Party Devices Perkin Elmer Series 200 Diode Array Detector: Installation.
For installation details, refer to Hardware Installation: Installing and Controlling Third-Party Devices Perkin Elmer Series 200 Diode Array Detector: Installation.