Automatic Liquid Sampler Installed:

Select this check box if you work with an automatic liquid autosampler.

Name:

Enter the autosampler name.

Tray Installed
(6890 GC only):

Select this check box if a tray is installed.

Fast Multiple Injection Supported (TOWER)
(6890 GC only):

Select this check box if the installed injector supports Fast Multiple Injection and you want to use this mode.

 Note: 

Fast multiple injection is only supported for firmware version N.06.07 and above.

Bar Code Reader Installed
(6890 GC only):

Select this check box if a bar code reader is installed. Select the UseBCR = On command to have the read value entered in the Audit Trail.

Installed:

Select this check box if you use a (front/back) injector.

(GC 6850 only): Click the arrow to select the installed injector (supported injector: 7683 ALS) or the type of tray (22 vials or 27 vials).

(6890 GC only): Click the arrow to select the installed injector (supported injector types: Agilent 7673 ALS, 7683 ALS and 7693 ALS).

 Note: 

If both injectors are installed on the 6890 GC, Dual Inject is automatically enabled. Both injectors can inject simultaneously from two different sample positions.

Name:

Enter the injector name.

Syringe:

Enter the currently used syringe type.