Pump Type:

Select the pump type.

GSIOC:

Enter a separate GSIOC address for each connected pump. The address must match the address set on the instrument itself.

Each pump must have a unique GSIOC address:

For the Gilson 321 pump, enter any address between 0 and 63 on the pump's control panel.

For the Gilson 322 pump, you may use any address between 0 and 9. Set the address via the switch on the pump's rear panel.

For more information about how to install the pumps, refer to Hardware Installation  Gilson 321 and 322 Pumps.