Location:

Detection tab page
Report Variable (Detection Parameters)

Type:

Switch

Dimension:

---

Value Range:

On; Off

Default:

Off

Description:

The Inhibit Integration detection parameter serves to fade out certain chromatogram areas. When set, peak detection is disabled.

Function:

If the value is set to On before the first peak to inhibit, peak detection will not take place until the parameter is disabled (Off); that is, no peaks are recognized in this area. The chromatogram is displayed on screen, but it is not integrated.

Inhibit Integration can be used to inhibit the injection peak by activating the criterion at the start time of the chromatogram and by deactivating it after the dead time.

 Tip:

To have any effect, set this parameter before the first peak to be inhibited starts.