Full-Scale Gain Range

The sensitivity range of the detector can vary between 100 pico amperes and 100 microampere in 19 steps. The smaller the selected range is, the larger is the representation of the detected peaks. The following ranges are possible:

100 / 200 / 500 pA

1 / 2 / 5 / 10 / 20 / 50 / 100 / 200 / 500 nA

1 / 2 / 5 / 10 / 20 / 50 / 100 µA

Only discrete values depending on the unit are possible. The sensitivity range of 100nA, for example, is realized by the following input:

100_nA

The input can be simultaneous for all installed channels (All Channels) or for each individual channel.