Relay, TTL, and Remote Input CommandsSpecial Commands, Relay Control, and Miscellaneous
Relay, TTL, and Remote Input Commands
Enable/Disable Relays
|
0.000 |
RELAYNAME.State |
=On / Off |
Alternatively, the following short command is valid:
|
0.000 |
RELAYNAME.On |
|
|
0.000 |
RELAYNAME.Off |
|
Enable/Disable Relay for a specific duration
|
0.000 |
RELAYNAME.On |
Duration= Value[s] or |
|
0.000 |
RELAYNAME.Off |
Duration= Value[s] or |
|
0.000 |
RELAYNAME.Duration |
=Value[s] |
Note:
The RELAYNAME.Duration command switches the relay to the other state for the specified duration. Depending on the current state of the relay, this command may thus activate or deactivate the relay for a certain duration.
Enable/Disable TTLs
|
0.000 |
TTL_NAME.State |
=0v / 5v |
Alternatively, use the following short command:
|
0.000 |
TTL_NAME.0v |
|
|
0.000 |
TTL_NAME.5v |
|
Enable/Disable TTLs for a specific duration
|
0.000 |
TTL_NAME.0v |
Duration=Value[s] |
|
0.000 |
TTL_NAME.5v |
Duration=Value[s] |