Device Type:

HPLC system

Device Driver:

Hitachi (or Merck): LaChrom HPLC System

Hardware Options
Supported:

Module

Tested with firmware

L7100 Pump

8104410-05

L7200 Autosampler

8104410-04

L7250 Autosampler
(see Notes below)

L7300 Column Oven

8104410-00

L7400 UV Detector

8104410-03

Notes:

Operation of the L7250 Autosampler for sample preparation requires control via the Merck (or Hitachi): L7250 Autosampler device driver (see  Merck Hitachi L7250 Autosampler). You need an additional RS-232 port (COM port).

The LaChrom Elite and LaChrom Ultra HPLC Systems can be controlled by a separate Chromeleon driver package that is provided by Hitachi High-Technologies Corporation. The driver setup is available on the Chromeleon CD under Additional Drivers\Hitachi. For installation instructions, please refer to LaChrom_Elite_DRIVER_for_CHROMELEON_Inst.pdf in the same folder. Any questions or issues regarding this driver package should be addressed to Hitachi.

Restrictions

The driver does not support the following operations:

• Digital data acquisition

• Sample preparation of the L7250 Autosampler

License:

Timebase Class 3

Connection:

A D-Line cable and a D-Line converter (Merck part no. 1.18866; Hitachi part no. 810-5420)

 Tip:  

Each LaChrom HLPC system requires only one D-Line converter.

Fully connected null modem cable, Dionex part no. 1310.2263 (for more information, refer to  Null Modem Cable.)

Hardware
Prerequisites:

The following is required:

• A free RS-232 port

• An A/D converter (e.g., a UCI Universal Chromatography Interface) and associated signal cables.

Control Panels:

HitachiLaChrom.pan.