Installing and Controlling Third-Party Devices
Kontron 430, 535, and 432/332 UV Detectors: Overview

 

Device Type:

UV Detector

Device Driver:

Kontron: UV Detector 430,
Kontron: UV Detector 432 or
Kontron: UV Detector 535

Hardware Options
Supported:

No special options available.

 Note:  

The only difference between the Kontron 430 and 535 UV Detectors is that the 535 detector supports a Filter property. The Passive, Active, and Automatic settings allow filtering of the signal.

Control of the Kontron 332 Detector requires the same device driver as for the Kontron 432 Detector.

 

What is required?

License:

Timebase Class 2

Connection:

Special RS-232 cable (For more information, refer to  Kontron Cable in the Appendix of the Hardware Installation section.)

Hardware
Prerequisites:

  • An A/D converter is required for data acquisition. A UCI Universal Chromatography Interface including the appropriate signal cables may be used.

  • A free RS-232 port is required for control.

Control Panels:

KONT430.pan
KONT432.pan
KONT535.pan

 

Further Information

For information about how to install the detectors, refer to  Kontron 430, 535, and 432/332 UV Detectors: Installation.

For an overview of the different Kontron instruments that can be controlled by Chromeleon, refer to  Kontron.